Accessoires


Rubber car ramp set for scissor lift 50mm 2 pieces
RL50MM

  • 50mm high

  • Rubber granulate, extremely strong

  • Does not shift

  • Fixation not necessary


Specifications:

  • Dimensions 1000.0mm x500.0mm x100.0mm

  • Weight 37.0Kg

Lift ramp / car ramp

This car ramp set is ideal for use with low cars or lifts where the minimum height is too high. The plate is made of rubber granulate, is extremely strong, does not shift and therefore does not need to be attached.
Can also be used with two post lifts where the lifting pads are too high.

Technical specifications:

  • dimensions = 1000 x 500 x 50mm

  • material = rubber granulate

  • 2 pieces

Falco hydraulic oil 20L CH46V
OCH46V20



Specifications:

  • Dimensions 290.0mm x230.0mm x390.0mm

  • Weight 18.0Kg

Falco hydraulic oil CH46

- capacity = 20L

Especially for Falco lifts. Also suitable for all hydraulic applications with a large viscosity range accoring to: DIN 51524 part 1, 2 3, HVLP.

Falco hydraulic oil 20L CH32
OCH32V20



Specifications:

  • Dimensions 290.0mm x230.0mm x390.0mm

  • Weight 18.0Kg

Falco hydraulic oil CH32

- capacity = 20L

Especially for Falco lifts. Also suitable for all hydraulic applications with a large viscosity range accoring to: DIN 51524 part 1, 2 HLP.

Support adaptor 160mm Tesla
RP3T160

  • Suitable for lifts with rectangular pads of maximum 160mm

  • No damage to the battery

  • No damage to the vehicle

  • No adjustments needed to lift vehicle


Specifications:

  • Dimensions 170.0mm x170.0mm x30.0mm

  • Weight 0.523Kg

Support adaptor

This Falco Sollevatori support adapter is used for lifting a Tesla 3 model and is suitable for all lifts with a rectangular support pad with a maximum length of 160mm. The adapter is easy to place over the rubber pad and has the correct surface for a Tesla 3. This means that no further adjustments are needed to lift these vehicles.

  • diameter = 160mm

Support adaptor 140mm Tesla
RP3T140

  • Suitable for 1 and 2 post lifts

  • No damage to the battery

  • No damage to the vehicle

  • No adjustments needed to lift vehicle


Specifications:

  • Dimensions 150.0mm x150.0mm x30.0mm

  • Weight 0.448Kg

Support adaptor

This Falco Sollevatori support adapter is used for lifting a Tesla 3 model and is suitable for one and two post lifts. The adapter is easy to place over the rubber pad and has the correct surface for a Tesla 3. This means that no further adjustments are needed to lift these vehicles.

  • diameter = 140mm

Falco hydraulic oil 5L CH32V
OCH32V



Specifications:

  • Dimensions 280.0mm x200.0mm x130.0mm

  • Weight 4.481Kg

Falco hydraulic oil CH32

- content = 5L

Especially for Falco lifts. Also suitable for all hydraulic applications with a large viscosity range accoring to: DIN 51524 part 1, 2 HLP.

Falco hydraulic oil 5L CH46V
OCH46V



Specifications:

  • Dimensions 280.0mm x200.0mm x130.0mm

  • Weight 4.481Kg

Falco hydraulic oil

- capacity = 5L

Especially for Falco lifts. Also suitable for all hydraulic applications with a large viscosity range accoring to: DIN 51524 part 1, 2 3, HVLP.

Rubber block 120mm
RB120



Specifications:

  • Dimensions 160.0mm x120.0mm x120.0mm

  • Weight 2.9Kg

Rubber lift block / rubber block universal

Suitable for all scissor lifts.

- dimensions = 160 x 120 x 120mm

Tyre Saver Set
TS01

  • Prevents flat spots.
  • Interlockable for wide wheels
  • For use with caravans, trailers and other stationary vehicles

Specifications:

  • Dimensions 500.0mm x220.0mm x60.0mm

  • Weight 1.2Kg

wheel savers / tyre savers

With this tyre savers protect your tyres from flat spots. The wheel savers is suitable for cars, caravans, trailers or any other vehicle which will be stationary over long periods of time! Tyre savers were created to maintain tyres in good condition, car storage and saving the tyre life time and preventing hard bended rubber due to the round surface.
The curved profile of tyre savers helps to distribute the load placed on the tyre over a wider footprint.
Include a set of 2 wheel interlockable savers pieces.
Specifications:

  • Material = HDPE
  • Dimensions = 500 x 220 x 60mm

Rubber block 80mm
RB080



Specifications:

  • Dimensions 160.0mm x120.0mm x80.0mm

  • Weight 1.95Kg

Rubber lift block / rubber block universal

Suitable for all scissor lifts.

- dimensions = 160 x 120 x 80mm

Rubber Jack Pad Set for Tesla
RP3T4

  • Set of 4pcs
  • Suiteable for all lift’s and jack’s
  • Incl 0-ring for optimal connection
  • Prevents damage on the vehicle and the battery
  • No adjustments needed to lift vehicle

Specifications:

  • Dimensions 80.0mm x80.0mm x50.0mm

  • Weight 0.65Kg

lifting pad set / Tesla point pad / jack lift pad protecting battery / jack pad lift adapter
The Jack Pad from Falco Sollevatori is used for lifting a Tesla model 3, S, Y & X and is suitable for garage jacks and car lifts.
The jack pad set protects the car battery or chassis from damage and can provide perfect protection.
The jack point pad is made of durable black rubber. Sturdy and durable, securely fits into lifting points of the car.
The connection design solves the problem that the adapter is easy to fall out of the lifting point. There is a rubber ring on the top of each jack pad to keep the adapter in the hole when it is inserted.
Include a set of 4 lifting pads.
Specifications:

  • Material = rubber
  • Diameter = 76mm
  • Diameter pick-up point = 25mm

Rubber lifting pad for Tesla
RP3T

  • Suitable for every vehicle lift and garage jack

  • No damage to the battery

  • No damage to the vehicle

  • No adjustments needed to lift vehicle


Specifications:

  • Dimensions 75.0mm x75.0mm x55.0mm

  • Weight 0.167Kg

Liftng pad

This Falco Sollevatori rubber lifting pad is used for lifting a Tesla 3 model and is suitable for garage jacks and lifts. The pad is easy to place on the lifting surface and has the correct connection for a Tesla 3. This means that no further adjustments are necessary to be able to lift these vehicldes.

  • diameter = 75mm

  • diameter pick-up point = 26mm

Rubber block 60mm
RB060



Specifications:

  • Dimensions 0.0mm x0.0mm x0.0mm

  • Weight 1.0Kg

Rubber lift block / rubber block universal

Suitable for all scissor lifts.

- dimensions = 160 x 120 x 60mm

Rubber pad 119mm Falco
RP1201082F



Specifications:

  • Dimensions 119.0mm x119.0mm x33.0mm

  • Weight 0.28Kg

Rubber pad / rubber support pad

Suitable for Falco lifts.

- dimensions = 119 x 119 x 33mm
- inner diameter = 108mm

Rubber block 40mm
RB040



Specifications:

  • Dimensions 160.0mm x120.0mm x40.0mm

  • Weight 0.97Kg

Rubber lift block / rubber block universal

Suitable for all scissor lifts.

- dimensions = 160 x 120 x 40mm

Rubber block 20mm
RB020



Specifications:

  • Dimensions 160.0mm x120.0mm x20.0mm

  • Weight 0.47Kg

Rubber lift block / rubber block universal

Suitable for all scissor lifts.

- dimensions = 160 x 120 x 20mm